Power Adapter Cable - Type-C PD to DC 5.5mm x 2.5mm (65W Max)

Product Summary

Built-in PD Emulator Trigger with Type-C female.

Editorial narrative

Built-in PD Emulator Trigger with Type-C female. Seamless compatibility for Spitz Plus (GL-X2000) and Spitz AX (GL-X3000). It supports up to 65W maximum power output (backward compatible with 45W/30W/20W/18W), perfectly matching the power demands of your router for home, office, or travel use. Specifications Parameter Details & Key Points Input Type-C Female, PD Charger Output DC 5.5mm x 2.5mm, Up to 20V (backward compatible with 15V/12V/9V) Power Supports up to 65W (backward compatible with 45W/30W/20W/18W) Voltage Requires PD charger with 9V-20V output Cable Length 27cm Compatibility Spitz Plus (GL-X2000) , Spitz AX (GL-X3000) Caution ⚠️ Critical Notes for Safe & Stable Use PD Charger Wattage Requirement : Must use a 30W or higher PD charger (matches X2000/X3000’s 12V/2.5A = 30W rated power). Ensures sufficient redundancy and stable activation of the PD trigger chip (avoids unstable power or boot failure). Voltage Compatibility Confirmation : GL-X2000: 9~36V voltage range → PD 20V output is fully compatible. GL-X3000: 9~36V voltage range → PD 20V output is fully compatible. Mandatory PD Charger Use : Relies on PD trigger chip for high-power conversion. Non-PD chargers may cause unstable transmission or failure to work. It also supports 5V/1A or 2A charging.

Facets

• Last verified: 2026-06-01