Lightning Arrestor for GPS Antenna
Product Description This lightning arrestor connects between the antenna and the GPS receiver.
Details
- Category
- Accessories
- Catalog status
- Catalog sync 2026-06-01
Product Summary
Product Description This lightning arrestor connects between the antenna and the GPS receiver.
Why It Matters
Product Description This lightning arrestor connects between the antenna and the GPS receiver.
Editorial narrative
Product Description This lightning arrestor connects between the antenna and the GPS receiver. A surge protection device for securing against transients, over-voltage, and surge currents induced by bolts of lightning. For the purpose of protecting the indoor equipment and circuitry connected to the LoRa gateway , you need to install an Ethernet Port Surge Protection Device (SPD). By adopting a high pass filter, this product can effectively suppress the low-frequency interference induced by lightning while letting through the GPS signal with low insertion loss. A transient suppression device (TSD) and a gas discharge tube (GDT) is adopted for the protection of the DC feed circuit Key Features Connector Type: N-type male to N-type female Impedance: 50 Ω Frequency Range: 1500-1650 MHz Power Loss: ≤ 0.3 dB Ingress Protection: IP65 Packaging Product Weight: Approximately 200g Product Dimension: 89mm x 30mm Documentation Lightning Arrestor for GPS Antenna Documentation Become a RAK Affiliate and Earn Today! Get paid to talk about RAK products! Join the RAK Affiliate program today.
Facets
- Last verified: 2026-06-01
Similar Products
About the Vendor
Vendor Name
store.rakwireless.com
Verification
Source: editorial review (2026-06-01).
- Prices and availability can change at vendor checkout.
- Technical claims may reflect vendor language unless editorially verified.
- Outbound links are provided for independent verification and comparison.
Confidence legend: ✓ editor-confirmed, ● vendor claim, ? inferred from product description.
Affiliate + editorial disclosure
